When are like it Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns
Price:
Technical Information:
Features Prime Line Prod. PL-15515 Plastic Screen And Storm Door Grilles Review
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 10 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 1.0 psi at a flow rate of 2 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
Related Products Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns Buys
Related Products
-
Pentek P5-20 Spun Polypropylene Filter Cartridge, 20" x 2-3/8", 5 Microns -
Pentek EP-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 5 Microns -
Pentek P25-20 Spun Polypropylene Filter Cartridge, 20" x 2-3/8", 25 Microns -
Pentek C1-20 Carbon-Impregnated Cellulose Filter Cartridge, 20" x 2-1/2", 5 Micron -
Pentek S1-20 Pleated Cellulose Filter Cartridge, 20" x 2-5/8", 20 Micron
Do not miss! They offer the best Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns for sale now with special price for today. We offer you the best deal for online Sh0pping in USA. You buy Pentek EPM-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 10 Microns now get fast delivery directly from amaz0n.
Product Description
This Pentek EPM-20 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 1.0 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
SpecificationsNominal filtration rating10 micronsInitial pressure drop at 2 gpm1.0 psiChlorine reduction capacity6,000 gallons at 2 gpmTemperature range40 to 180 degrees F (4.4 to 82.2 degrees C)Maximum dimensions (H x W)20 x 2-7/8 inches (508 x 73 mm)Materials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Tag : Carbon Block Cartridges - Water Filtration and Water Purification ... H2ODistributors offers a wide selection of Carbon Block Cartridges to provide you with clean and safe water. A certified water specialist is available to help. Pentek - Water Filtration and Water Purification - H2O Distributors Pentek is the largest brand in the water filtration industry. Pentek GAC-10 Drinking Water Filter (9-3/4" x 2-7/8"): ... The PENTEK-GAC-10 cartridge provides effective reduction of chlorine and bad taste & odor from your drinking water. The filter cartridge is manufactured to prevent ... Well Water Sand Filter - Compare Prices, Buys and Guide at Nextag Well Water Sand Filter - 28 results like 155763-43 / Pentek PD-5-30 Single Polydepth Sediment Water Filter, Bur Cam Bur-Cam Pumps 750896 Water Shallow Well Pump Point ... : User Buys: Pentek CBC-10 Carbon Block Filter ... 4 stars. "Quality .5 micron solid carbon block filter" These filters are typically used with under sink or reverse osmosis filters. It's a carbon block (one solid ...
Tidak ada komentar:
Posting Komentar